* APPLICATION This tester is used to perform all operations from measurement of thickness and notch depth of specimen, test piece positioning of mounted on support, reading angle of rise to statistical operation including impact value and data processing.
* Capacity : 0.5-1J, 2-4 J, 7.5-15 J
* Size of test piece : W10mm X T4 mm X L80mmC
* Volume(Liters): 120, 225, 408 to 800
* Dimension & weight : main unit: W 120 X D75 X H200 cm, 300kg
* Control panel: W60 X D70 X H 160 cm Approx 45kg

* APPLICATION: This tester can be performed in full automatic operation under the environmental condition in the range of -40°c ~ +80°c by only setting the test piece.
* Capacity : 1J, 2.75- 5.5J, 1-2J, 3-6J, 8-15J,1.35-2.7J, 4J, 13.5J
* Size of the test piece : W 10 mm X T 4 mm X L80mm, W12.7mm X T 3.2mm X L63.5mm, W 12.7mm X T 6.2mm X L63.5mm
* Dimension and weight : W 135 X D100 X H180 cm, Approx 650kg

* Capacity : 0 ~ 1.5J, 0~3J,
* Temperature range : -35~+100°C
* Dimension of specimen : W 100 mm X ø100mm
* Dimension & weight : W 100 X D 65 XH 80 cm, Approx 150 kg

* APPLICATION: This tester is the most widely –used in the abrasion test on a plane material.The abrasive level in contact side with two abrasive wheels is evaluated by loss in mass, thickness of the specimen.
* Rotational speed : 60rpm (50Hz) or 72 rpm (60 Hz)
* Load : 5 digits, digital type
* Dimension & weight : approx. W 28 X D40 X H26 cm, Approx 20kg

* APPLICATION: Abrasive paper is wound on the surface of a rotary drum, sample subjected to load is placed on it and evaluation is made from the amount of rubber lost.
* Diameter of drum : 150 mm
* Sample dimensions : ø16mm X T6 ~10mm
* Test load : 2.5 ~20N
* Drum speed : 40rpm
* Dimension & weight : W 95 X D 33 X H31 cm, Approx. 50kg

* APPLICATION This tester is used for abrasion test of formal wire .Reciprocating abrasion is applied to wire by means of needle and abrasion strength is determined from frequency of reciprocation at the time covering breaks.
* Diameter of bead needle : 0.4mm
* Adjustable revolving angle of specimen : 0°, 120°, 240°
* Load Range : 2~10N
* Reciprocation speed : 60cpm
* Dimension & weight : W 45 X D25 X H 35 cm , Approx. 22kg

* APPLICATION This testing equipment provides information for plastics, rubber product management and control by following the process of change from sol state to gel state through change in dynamic viscoelasticity.
* Cell capacity : approx .1.6 cc
* Displacement : ±100 µm (p-p)
* Measuring angle : 10~10³Pa
* Dimension & weight : W 30 X D45 XH40 cm, Approx. 30kg

* APPLICATION: This tester measures hardness of plastic and rubber by needle penetration method. It is a digital version of former Durometer.
* Type of hardness tester : ASTM Type, JIS A type, JIS D type,
* Dimension & weight : main unit: W6 X D4 X H 14 cm, Approx.0.3 kg C
* Stand: W12 X D22 X H38 cm, Approx. 7.5kg

* APPLICATION: This tester measures hardness of plastics by pressing steel ball on sample surface and indicates as Rockwell hardness
* Presser : steel ball of 12.7 mm dia or 6.35mm
* Standard load : 98.07N
* Test load : 588.4 N or 980N
* Hardness calculator : 130~150mm

* APPLICATION: This tester measures tearing resistance of paper, paperboard, plastic film, Woven cloth from the loss of potential energy of fan –shaped pendulum and the result operated is digitally display.
* Measuring value : digital display
* Specimen size : 63 mm X76mm
* Dimension & weight: W50 X D42XH70 cm, Approx. 36kg

* APPLICATION This tester is designed as natural circulation type for the material s of electric wire cable.
* Dimension of oven : 61 X 52 X 50 cm
* Temperature : max. 250 °C
* Air change rate : 8 ~20 times/h

* APPLICATION: This tester conducts aging test of rubber in an atmosphere of ozone. Employs rays absorption method for controlling ozone concentration.
* Internal dimensions of oven: Model S and D 50 X 50 X50 cm Model SD 50 X 50 X 75 cm
* Ozone concentration: PPHM type 0 ~200 pphm PPM type: max 200ppm

* APPLICATION: This equipment is used for conducting Mooney viscosity test and scorch test of un vulcanized rubber.
* Mooney viscosity range : 0~ 400M
* Scorch time : 0~99.9 M
* Temperature range : +5 ~ 200°C